Furnace

Furnace
   It consists of one or two power frequency induction melting chamber and a power frequency induction holding chamber.
 Power frequency induction melting chamber:
The shell of furnace body is made of refractory steel by welding. The internal of the furnace body is a furnace chamber which is bricking in mold bricks. Between the mold bricks there is the furnace lining that is ramming of quartz sands. The high voltage side of the furnace inductor is the coiled in rectangle hollow wire. The low voltage side is general call a short circuit coil of melting channel Whose material is just the material for melting. After turning on the induction device, under the effect of induction heating, the copper will be melted.
 Power frequency induction holding chamber:
It is elemental structure is much same the melting chamber as stated above. In order to hold the molten copper level stability there is a channel which is made from mold brick between the melting and holding chamber. The power of each inductor is 120KW until 250 KW and it will be selected according to the type of the machine.